After-sales Service: | After-Sale Service Is Available |
---|---|
Max Diameter of Workpiece: | 40mm |
Mass Scope of Workpiece: | 28kg |
Type: | Tester |
Maxcapacity: | 1000n |
Load Way: | Electronic Load |
Customization: |
---|
Suppliers with verified business licenses
Specifications | 150 | 300 | 500 | 1000 |
Maximum force load | 150N | 300N | 500N | 1000N |
Maximum sample size | 25mm sample stand can be replaced up to 40mm | |||
Relative error | ±0.5% | |||
Display resolution | 0.1N |
|||
Maximum data storage | 2000 samples | |||
Multiple working modes | The instrument provides four working modes, which can be set according to different use conditions: 1 - Ball sample test 2 - Radial test (length gauge is required); 3 - Axial test (length gauge is required); 4 - Pile pressure measurement |
|||
Abnormal data processing | Exception data processing can be set to provide three elimination methods: 0 - No rejection; 1 - Remove one maximum and one minimum respectively; 2 - Reject two largest and two smallest |
|||
Low intensity value setting | The lower limit value (low intensity value) of acceptable indicators can be set and can participate in the calculation | |||
Calculation function and display mode setting | The mean, standard deviation, coefficient of variation and low intensity percentage can be calculated. Two display modes are available according to different needs: 1 - Display all (original data and calculation results); 2 - Display calculation results only. | |||
Print function and print mode setting | Connect the printer to print the strength test report of original data and calculated results. Two printing methods are available according to different needs: 1 - Print all (original data and calculation results); 2 - Print calculation results only. | |||
Overall dimensions and weight | 340mm * 220mm * 480mm (L * W * H) net weight 28Kg | |||
Working power supply | 220V±10% 50Hz |
|||
Overall power consumption | ≤200W |
Suppliers with verified business licenses